Description
This fits between the input plug in the lower cubby to install an air ride controller. Made of 3D printed ABS composite, textured front surface.
The cubby can still stash small items behind the controller and the door still opens and closes.
Install requires drilling a hole in the back of the lower cubby to install wiring. The rubber mat on the bottom of the cubby also needs to be removed.
** This is for amount only, no controller included
Make
Model
Submodel
Engine
Special Fitment Notes
Volkswagen |
Golf VII |
Hatchback |
1.8T Gen3 |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII |
Sportwagen |
1.8T Gen3 |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII |
Hatchback |
2.0T Gen3 |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII |
All |
2.0T Gen3 |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII |
Hatchback |
e-Golf |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII |
Hatchback |
TDI |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII |
Sportwagen |
TDI |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII |
All |
TDI |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII Facelift |
FWD |
1.4T |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII Facelift |
FWD |
1.8T Gen3 |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII Facelift |
FWD |
2.0T Gen3 |
Use vehicle selector to confirm fitment
|
Volkswagen |
Golf VII R |
4Motion |
2.0T Gen3 |
Use vehicle selector to confirm fitment
|
*The above product applications have been written by
ECS Tuning. All warranties, product application, fitment,
and performance are the responsibility of ECS Tuning.
For additional information see the terms of use.
Reviews
There are no reviews yet.